概述 Overview
本厂引进国外先进阀门制造技术，采用独特的“浮动密封”原理生产的蝶阀，彻底的消除了阀门内漏的可能性。并能减少密封阀座的磨擦阻力及操作扭矩。可广泛的使用于给排水、建筑、空调、污水、石油、化工、食品、医药、轻纺、水电等系统流体管道作截止和调节作用。
Advanced valve manufacturing technology is introduced from abroad by our factory to produce buterfly valve through adoption of unique"loatina seal" princiole,which can completelv avoid the probabllity of valve internal leakage, and reduce frictional resistance and operaliontorque of sealing valve seat, t performs cutoff and regulating function in systematic fluid pipelines of water supply and drainage, construction,
air-conditioning, sewage,oil, chemical engineering, foodstuff,medicine, light textile and hydropower etc.
特点 Features
1、浮动式阀座，能自动找正蝶板最佳密封位置，达到良好的密封效果，并减少操作扭矩。
2、采用单偏心结构，可减少阀座在开关过程中磨擦，提高使用寿命。
3、球形密封面，保证阀门在关闭时，即使出现关不到位的情况，也能保证门密封不水。
4、特殊销子设计，保证蝶板与阀杆紧密结合，并可进行更换。
5、整体烤漆，能有效地防止锈蚀且只要更换阀座材料，、就可使用于不同介质。
6、精益选材，保证每个零件具有很高的可靠性。
1. Floatina valve seat can automalically find the best seaing posiion of buterly valve to reaize good seaing efect, and reduce operation torque
2, Adoption of single eccentric structure can reduce valve seat friction during opening and closing so as to increase service lifetime.
3、 $pherical sealing surface ensures good sealing property even if valve is not closed completely during its closing.
4、 Special pin design ensures close combination between buttertly plate and valve stem, and replacement can be done as wel.
5. Overal baking varnish can effeclively avold rusting. Product can be applied to diferent media as long as the material of sealing valve seat is
replaced.
6、Each accessory is made of high quality material, with high reliability.
技术参数 Technicalparameters
压力等级:1.0MPa、1.6MPa
Pressure rating:1.0MPa、1.6MPa
阀体压力:1.5MPa、2.4MPa
Valve body pressure:1.5MPa、2.4MPa
工作温度:0~80℃
Operating temperature:0-80℃
密封试验:1.1MPa、1.76MPa
Sealing test:1.1MPa、1.76MPa
适用介质:水、油、气等
Applicable media: water, oil and gas etc.
